引用本文
  •    [点击复制]
  •    [点击复制]
【打印本页】 【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 667次   下载 325 本文二维码信息
码上扫一扫!
果园机械化经济效益分析——以江苏烨佳梨园为例
吕雍琪1,张宗毅1,吕晓兰2*
0
(1.农业农村部 南京农业机械化研究所, 南京 210014;2.江苏省农业科学院 农业设施与装备研究所, 南京 210014)
摘要:
针对果园机械化经济评价问题,采用成本分析理论模型和敏感性分析法,对江苏烨佳梨园生产过程中疏花、采摘、施药、除草、剪枝、施肥深松和灌溉7 个环节各作业方式的最低平均成本、机械装备替代传统作业的临界规模、机械装备相对传统作业方式的平均节省成本和临界规模的影响因素进行研究。结果表明:1)机械装备作业在一定规模后可以明显比传统方式作业节省成本,如手持式疏花器在种植面积大于0.11 hm2时,是更具经济效益的疏花方式,移动式水肥一体化系统在种植面积大于34.33 hm2时,是更具经济效益的灌溉方式;2)机械装备固定成本和传统作业方式零工成本是影响临界规模的重要因素,固定成本增加20%临界规模将增大约20%,零工成本增加20%临界规模将减小15%以上;3)案例中,梨园在机械装备平均成本最低的种植面积下,使用机械装备替代传统方式作业,全作业环节可节约成本11 536.87元/hm2。机械化装备需要果园规模大于临界规模才具有经济效益,随着固定成本降低,零工工资上升,机械装备作业替代传统方式作业临界规模变小,果园机械装备经济适用范围增大。
关键词:  果园机械化  成本分析  敏感性分析  临界规模
DOI:10.11841/j.issn.1007-4333.2021.11.22
投稿时间:2021-03-30
基金项目:江苏省农业科技自主创新资金项目(CX(18)1007);国家自然科学基金项目(71973074);中国农业科学院基本科研业务费项目(SR202109-01)
Analysis of economic benefit of orchard mechanization: Taking Yejia pear orchard in Jiangsu as an example
LV Yongqi1,ZHANG Zongyi1,LV Xiaolan2*
(1.Nanjing Institute of Agricultural Mechanization, Ministry of Agricultural and Rural Affairs, Nanjing 210014, China;2.Institute of Agricultural Facilities and Equipment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China)
Abstract:
By combing the theory of cost analysis model with sensitivity analysis method, the lowest average cost calculation, machinery operation of critical size, relative to traditional practices, on average, cost savings and the influence factors of critical mass, seven aspects of orchard production process, e. g. flower thinning, picking, plant protection, weeding, pruning, fertilization & deep digging and irrigation machinery economic benefit, in Yejia pear orchard in Jiangsu were investigated for the economic evaluation of orchard mechanization. The results showed that: 1)The mechanical equipment operation after a certain size can obviously save more than the traditional way. The handheld thin flower implement in the planting area of more than 0. 11 hm2 became the most economical mode of operation. The irrigation link planting area of more than 34. 33 hm2 was the most economical way of operation system; 2)The fixed cost of machinery and the odd jobs cost were the important factors affecting the critical scale. If the fixed cost increased by 20%, the critical scale would increase by about 20%. And when the odd jobs cost increased by 20%, the critical scale would decrease by more than 15%; 3)The cost per hm2 of pear orchard in the study was saved by 11 536. 87 yuan. With the decrease of fixed cost and the increase of labor wage, the critical scale of mechanical equipment operation to replace the traditional way of operation became smaller, and the scope of economic application of mechanical equipment in orchard became larger.
Key words:  orchard mechanization  cost analysis  sensitivity analysis  critical mass