| 摘要: |
| 利用机械系统仿真软件ADAMS建立了摆线针轮减速机虚拟样机模型，探讨了建立虚拟样机模型过程中的关键技术。利用该虚拟样机对天津减速机总厂XW—8175—11型摆线针轮减速机的传动比进行了验算，分析了针齿与摆线轮之间的受力状况。结果表明，采用虚拟样机得出的结果与理论分析值具有较好的一致性。 |
| 关键词: 行星摆线针轮减速机 虚拟样机模型 机械系统仿真 ADAMS |
| DOI： |
| 修订日期：2002-04-26 |
| 基金项目: |
|
| Building and Study on Planet-cycloid Gearing Virtual Prototype |
|
|
|
| Abstract: |
| The virtual prototype of planet cycloid gearing was built by using mechanical system simulation software ADAMS. The key technology about the virtual prototype was studied. The validation test of the transmission radio of XW817511 planet cycloid gearing made in Tianjin Reducer Factory was carried out and the forces between the pin and cycloidal gear were analysed. The consistence of virtual prototype and theoretical calculation was confirmed. |
| Key words: mechanical system simulation,planet cycloid gearing,virtual prototype |
